Uncategorized
Porcelain
Easi-Flex Wall & Floor Adhesive – Grey
£16.99
EASI-FLEX (GREY) Wall & Floor Tile Adhesive is an easy to use standard setting adhesive for fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay. It is available in white or grey and gives a 4 hour working time before curing at 24 hours to a fully water-resistant bond suitable for interior / exterior use and locations which are frequently wet. Easi-Flex Wall & Floor Tile Adhesive is available in WHITE & GREY, with a long open time and excellent non-slip properties, which make it the perfect choice fixing large format wall tiles in circumstances where a ready mixed adhesive would not be suitable. Conforms to: BS EN 12004 C2TE-S1 4 hour working time Grey Ideal for mosaics & light marble Initial set after 16 hours Excellent Non-Slip for wall tile fixing
Flexible Adhesive – C10
£16.99
KLEIB C10 is a cement-based adhesive for bonding wall and floor ceramic tiles (glazed tiles, terracotta tiles) and porcelain tiles. It can be used on all dry, even and structurally sound mineral substrates inside and outside buildings, also for underfloor heating system. It is suitable for sticking big tiles with an area below 0.8 m2. • high yield, economical in use • for each type of tiles: glazed tiles, terracotta tiles and porcelain tiles • for interior and exterior use • for underfloor heating systems • with reduced slip and extended open time • waterproof and frost resistant
Non-Flexible Adhesive – C9
£16.50
KLEIB C9 is a cement-based adhesive for bonding wall and floor ceramic tiles (glazed tiles, terracotta tiles). It can be used on all dry, even and structurally sound mineral substrates inside buildings. It is suitable for sticking small tiles with an area below 0.2 m2, as well as for leveling and spackling of surfaces. For exterior surfaces use KLEIB C9,5. KLEIB waterproofing is recommended as protection against moisture. • high yield, economical in use • for each type of ceramic tiles (glazed tiles, terracotta tiles) • for interior use • waterproof
Rapid-Set Wall & Floor Tile Adhesive
£17.49
RAPID SET is recommended for fixing ceramic & stone tiles to solid masonry based surfaces such as concrete, render, floor screeds, block-work and brickwork. Tiles fixed with RAPID SET can be grouted 3 hours later as it cures to a fully water-resistant; frost resistant bond suitable for interior / exterior use and locations which are frequently wet. Conforms to: BS EN 12004 C1FT Fast Setting Water resistant Floor & wall tile adhesive High Early strength Suitable for full immersion
